AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Aqara has released a software update that lets its Hub M3 bridge the G100 security camera into Matter. The feature is available now, supports up to four cameras per hub and currently lists only the G100; Aqara has not given a timeline for adding other models.

Aqara has begun rolling out a software update that lets its Hub M3 bridge the Camera G100 into Matter, making the camera discoverable to connected smart-home platforms without requiring it to run Matter natively. The feature is available to the public, but the G100 is the only camera Aqara currently lists as supported, and each Hub M3 can bind up to four supported cameras.

Before you orderOffer from Amazon

Get home appliances delivered free with Prime

  • Fast, free delivery on millions of items
  • Prime Video, Amazon Music and more included
  • Member-only deals all year
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

To set up the feature, users must update the firmware on both the Hub M3 and Camera G100, then use the Aqara app’s device settings to select and bind the camera to the hub. Aqara’s bridge presents the camera as an endpoint under the hub’s Matter connection. Compatible platforms, including Home Assistant and SmartThings, can then discover the device.

The reported streaming experience is similar to that of a native Matter camera, with video handled locally. However, early testing found a problem with Home Assistant Core: streams failed to load through that route. The same setup worked through the Open Home Foundation Matter Server and SmartThings. That is a report from early testing, not confirmation that every Home Assistant configuration will encounter the issue.

Aqara’s feature description refers to cameras and doorbells, but the current supported-device listing names only the G100. The G410 Doorbell Camera Hub may be a candidate for later support, but Aqara has not announced that it will be added or provided a release date. The four-camera limit applies to supported devices bound to one Hub M3.

At a glance
updateWhen: Available now; support for additional c…
The developmentAqara has enabled a Hub M3 software feature that exposes supported G100 security cameras to Matter-compatible smart-home platforms.
Smart Home · Briefing

Aqara Hub M3 bridges cameras into Matter

A software update lets the Hub M3 expose supported cameras to Matter platforms. The Camera G100 is currently the only listed model.

4
supported cameras per Hub M3
1
currently listed model: G100

How the bridge works

The hub connects the camera to Matter without requiring the camera to run Matter natively.

1
Update both devices

Install the latest firmware on the Hub M3 and Camera G100.

2
Bind in the Aqara app

Use the camera’s device settings to bind it to the hub.

3
Connect your platform

The bridged camera can be discovered through compatible Matter platforms.

What works—and what to check

Discovery and streaming results can vary with the platform’s connection route.

Platform or routeReported result
SmartThings✓ Streams worked
Open Home Foundation Matter Server✓ Streams worked
Home Assistant Core~ Streams failed in early testing

Support remains narrow

The current listing—not general wording about cameras and doorbells—defines confirmed compatibility.

Confirmed now
  • Camera G100 is listed as supported.
  • One Hub M3 can bind up to four supported cameras.
Not confirmed
  • No other camera model or doorbell is listed.
  • No expansion date or Home Assistant Core fix has been announced.
Check firstBefore relying on the bridge, confirm your model is listed and test whether video loads through your chosen Matter platform.
The takeaway
Hub M3 owners can bridge the G100 into Matter now, but compatibility beyond that camera—and consistent streaming across platforms—remains unconfirmed.

A Bridge for Existing Cameras

The update offers a way to bring a supported camera into Matter-connected setups without replacing it with a model that handles Matter directly. For owners of the G100 and Hub M3, that could make camera discovery and access across supported platforms simpler, while leaving the hub to handle the bridge between the camera and Matter.

That arrangement may also reduce the hardware and development demands on camera makers. The supplied reporting says that processing video while running a native Matter stack can add cost and engineering work, particularly for lower-priced products. A hub-based bridge shifts some of that work away from the camera. The potential benefit for other manufacturers is a broader point about the approach, however; the update currently confirms support only for Aqara’s G100.

For users, compatibility is not the same as guaranteed performance in every platform. The reported Home Assistant Core stream failure shows that the software path used to connect a Matter platform can matter. Buyers should check the current supported-device list and their chosen platform’s behavior before relying on the bridge as a replacement for an existing camera workflow.

Products Worth Considering

Google Nest Learning Thermostat (4th Gen) with Nest Temperature Sensor (2nd Gen), Obsidian

Google Nest Learning Thermostat (4th Gen) with Nest Temperature Sensor (2nd Gen), Obsidian

As an affiliate, we earn on qualifying purchases.

Why Aqara Uses the Hub

Native Matter camera support requires a camera to manage video streams alongside Matter’s protocol functions. The reporting describes those demands as a cost challenge for entry-level cameras, citing chipset expenses that can rise by as much as 50% amid AI-related demand. That figure is presented as a possible increase in component costs, not as a measured increase for the G100 specifically.

A dedicated hub can take on the bridging role, potentially allowing a camera to connect to Matter without having all of the processing capacity required for a native implementation. The idea is not limited to Aqara: the open-source project Matterbridge by Luligu and Tamer has also been used to bring standard RTSP cameras into Matter. Aqara’s update applies the general approach to a supported camera in its own product ecosystem.

Support and Streaming Limits

Expansion beyond the G100 remains unconfirmed. Aqara has not published a schedule for adding other cameras or doorbells, and its mention of doorbells in the feature description does not establish that any specific doorbell model will work. The G410 is a possibility raised in the reporting, not a confirmed supported device.

The scope of the Home Assistant Core streaming problem is also unclear. Early testing reported that streams did not load in Core but did work through the Open Home Foundation Matter Server and SmartThings. Aqara has not provided details here about a fix, the cause of the issue or which Home Assistant versions are affected. The reported local-stream behavior likewise does not establish compatibility or identical performance across every Matter platform.

Watch for Model Additions

Users can try the feature now by updating both the Hub M3 and Camera G100 firmware, then binding the camera in the Aqara app. The immediate practical checks are whether the camera appears in the chosen Matter platform and whether its stream loads through that platform’s particular Matter connection.

The next confirmed milestone would be an Aqara announcement naming additional supported models or setting out a compatibility schedule. Until then, users should treat the G100 as the only officially listed camera and the four-camera-per-hub cap as the current limit. No expansion date or software fix for the reported Home Assistant Core issue has been announced.

Source: rss

Key Questions

Which camera works with the Aqara Hub M3 Matter bridge?

Aqara currently lists the Camera G100 as supported. It has not announced support for other camera models.

How many cameras can one Hub M3 bridge?

A single Hub M3 can bind a maximum of four supported cameras.

Which smart-home platforms can discover a bridged camera?

The reporting says Home Assistant and SmartThings can discover the camera. Early testing found streams worked through SmartThings and the Open Home Foundation Matter Server, while they failed to load through Home Assistant Core in that test.

Will Aqara add doorbells such as the G410?

Aqara’s feature description mentions cameras and doorbells, but it has not confirmed the G410 Doorbell Camera Hub as supported or announced a schedule for adding other models.

Source: matteralpha.com

You May Also Like

Why Smart Homes Need Better Backup Plans Than Most People Think

Never underestimate how a robust backup plan can protect your smart home from unexpected failures and security risks—discover why it’s more crucial than you think.

A Room-by-Room Look At The 10 Best Mesh WiFi Systems For 2027

A 10-system mesh Wi-Fi roundup compares Wi-Fi 5 through Wi-Fi 7 options, coverage claims, smart home features and tradeoffs.

Why Whole-Home Leak Detection Is More Than a ‘Nice to Have’

AIThis post was created with the assistance of artificial intelligence (AI).Whole-home leak…

How Apple Can Win The Smart Home

Apple is expected to introduce a smart-home display and refreshed devices. Its larger opportunity may depend on bringing a more capable Siri into the home.